CS101 CS101 Help  
Information
Information
Configuration
Configuration
Log Information
Log Information
Help
Help
 
IP Address  
IP Address
This section is to set CS101 IP address.
Subnet Mask
This section is to set CS101 Subnet Mask.
Gateway
This section is to set CS101 Gateway.
Obtain an IP address
This section is to set CS101 IP address manually or via DHCP.
 
The above 4 sections can be set in Netility as well. CS101 will reboot after any of the above are changed.

DNS Server IP  
Primary DNS Server IP
This section is to set CS101 primary DNS Server IP address.
Secondary DNS Server IP
This section is to set CS101 secondary DNS Server IP address. CS101 will use the secondary DNS Server IP address when the Primary DNS Server IP address is not working.

Ethernet  
Connection Type
This section is to set communication speed between CS101 and Network. CS101 will reboot after Connection Type is changed.
Stop UPS communication when Ethernet disconnected
This section is to set if stop UPS communication when CS101 disconnects from Ethernet.

Dynamic DNS  
Services Provider
CS101 can be configured to register with any of the Dynamic DNS providers.
In general, to register a Domain Name;
  1. Go to the DDNS provider website listed.
  2. Register a new user account and password with the DDNS provider.
  3. Choose a Domain Name to point to your current Dynamic IP
  4. Enter information obtained in (b) and (c) into CS101 DDNS fields
Domain Name
This is the Domain Name you have created from the above selected DDNS provider.
Login Name
This is the Login / Account name that you have created with the selected DDNS provider.
Login Password
Enter the Password you have assigned to your DDNS Account.
Use external STUN server to get Public IP to register
Choose Yes to ensure that CS101 uses the WAN / Public IP to update the selected DDNS server.
 
This is a free service that allows the user to alias a dynamic IP address to a static hostname.

PPPoE  
When Connection should be made
This is to set if use PPPoE to connect with CS101 UPS.

Disabled Default setting.
Connect alwaysCS101 will automatically dial up and maintain continuous connection.
Login Name
Enter the login name assigned by your ISP.
Login Password
Enter the password assigned by your ISP.
 
Use this option to allow CS101 to connect to the Internet directly using your xDSL modem. Once set-up, CS101 will connect directly to the Internet without going through a router. The LCD will display the current WAN / Public IP instead of the LAN IP Address.

Note: System will reboot if any configuration applies.


This page is to set CS101 Network settings.